How to Install Mural
How to Install
Tools Needed:
Measuring Tape
Pencil
Level
Scraper
Roller or brush
Heavy Duty Wallpaper Adhesive
Clean, Damp Cloth
Cutting Tool (scissors or utility knife)
Smoothing tool
Ladder
General Preparation:
- Ensure the wall surface is smooth and free from any sort of dust or imperfections.
- Remove outlets and light covers, nails or screws – that might come in the way.
- Sand down any rough or bumpy surfaces.
- Ensure the wall is smooth and free from any moisture before proceeding.
- If necessary, clean the walls using a sponge and mild detergents and wait for 24 hours to let it dry completely.
Step-by-Step Instructions:
- Unroll the wall mural/poster and lay it on a flat & clean surface.
- Measure your wall and the mural/poster to ensure a proper fit.
- Position the mural/poster against the wall and lightly mark the width of the mural/poster with a pencil.
- Then, use a level to draw a vertical line that will help when finally hanging the mural.
- Using a roller or brush, apply wallpaper adhesive directly onto the wall.
- To avoid bubbles or imperfections, you must apply an even and soft coat of the glue or adhesive.
- Starting from one corner, gradually align the mural onto the wall with the penciled guideline.
- Smooth out the mural with a wallpaper smoothing tool to eliminate any bubbles or ripples.
- Clean the adhesive with a cloth soaked in lukewarm water.
- Use a utility knife or sharp scissors to cut out any excess material at the edges or around outlets or switches.
- Allow the mural to dry at room temperature, ensuring some ventilation.
- And, You’re done!